Ebtech Swizz Army Cable Tester
		QTY:
The Ebtech Swizz Army 6 in 1 cable tester is the professional's choice for multi-function cable testers. The Ebtech Swizz Army 6 in 1 displays the exact wiring of any cable or adapter and even allows testing of cables installed in building walls. Its intermittent detection allows you to wiggle a cable like crazy and know if there was an intermittent connection at any time - even if you didn't see the LEDs change! With the added functions of test tone generation, phantom power detect, and grounded XLR shield detect, the Ebtech Swizz Army 6 in 1 is the perfect utility tool! Ebtech Swizz Army 6 in 1 Features: Connectors: XLR, 1/4", RCA, 1/8", TT, MIDI Cable Wiring Display clearly shows which pin is wired to what. The Cable Wiring Display clearly shows continuity, opens and shorts for each pin. Intermittent Detect and Display: The Ebtech Swizz Army 6 in 1 stores and displays the intermittent information until you reset it - it even tells you which line has a problem. Installed Cable Testing: Connect the Ebtech Swizz Army 6 in 1 to one end of the cable and see if any of the lines are shorted together. Then, connect a shorting connector onto the other end of the cable and if the lines are good, the Cable Wiring display will show them as all shorted to each other. Test Tone Generation: The Ebtech Swizz Army 6 in 1 generates a 1kHz or 440Hz tone. Phantom Detect: The Ebtech Swizz Army 6 in 1 displays when a DC voltage is present on Pin 2 and Pin 3 individually. Grounded Shield Detect: Confirms that the XLR connector shield is connected to Pin 1 (grounded). Belt clip is included. Runs on two AA batteries (not included).