D-Tar Timber-Line Piezo Cable Pickup
D-Tar Timber-Line 1/8" Steel String 3/32" Classical 3/32" Split Classical		QTY:
Timber-line is a piezo cable pickup coupled to an 18 volt, low-noise, high input impedance preamp with twice the dynamic range of 9-volt preamps. The increased dynamic range and adjustable bass trim pot gives musicians a more natural and full sound. Timber-line is the perfect piezo pickup system for musicians who want a more complex signature from their acoustic guitar. Feature Benefit Unitary full length pickup Accommodates all string spacings and gets a more even response from the guitar’s top Co-axial cable design Can get a more complex signature sound of the guitar due to 360 degrees of vibrations along its length High headroom Allows for twice the dynamic range of a 9 V system, hard strumming, and reduces piezo “quackiness” Dual source capability Allows the user to combine with a mic, magnetic or soundboard transducer for greater complexity of signal Easy to install Installation intended for guitar builders and luthier-techs Adjustable bass trim control Simulates the air resonance of a typical acoustic guitar, warms up bottom end Stereo buffer upgradable Allows buffering a second signal to ensure proper impedance match Technical Specifications Power requirements — 9 to 18 Vdc Power consumption — 1.0 mA @ 18Vdc Battery life — approximately 500 hours @ 18Vdc Maximum signal swing, @ onset of clip —- 5.7V RMS @ 18Vdc Frequency response — -3dB @ <10Hz, 30KHz Gain — 14dB Thd 1V out, 1KHz — <.005% 1V out, 20Hz to 20KHz — <.03% Noise ref. to input: Wideband — -105dBV A weighted — -112dBV Control function, internal trimpot — Broadband bass boost +4db @ 80Hz Control function, external tone — Passive treble cut Available in 1/8" saddle for most steel string acoustic guitars, 3/32" for most classical guitars and split 3/32" for split bridge nylon classicals. Please select when purchasing.