There is no substitute for an amplifier that keeps delivering in any situation. Reliable pure valve tone with power to burn. The Arena is NOT a high gain amp, rather low to mid gain tones, yet designed very much with the use of pedals for extra gain in mind.
· 52 watts Class ‘AB’ valve amplifier (52 watts @ 8 ohm @ 5% THD)
· Dual voiced parallel preamp stage operated by DC heaters
· Deep volume, high volume, master volume, treble, middle, bass and presence controls
· NEW/OLD switch. NEW gives the output tubes full power while OLD replicates the natural power sag of vintage amplifiers for warmer bluesy sounding tube compression
· Designed to work with all pedals
· All steel 1.2mm zinc plated chassis. TIG welded
· All stainless steel component mounting hardware
· Military spec. Tag strip point-to-point hand wired
· Hi temp transformers hand wound in-house
· 240 volt and 110 volt primary taps
· Ultra high speed rectifiers for ultra low noise and solid tight bass response
· High temp pure ceramic tube sockets
· KT66/5751 output tubes
· 12AX7 preamp tubes
· 4, 8 or 16 ohm selectable speaker outputs
· 0db line-out jack tapped from the output stage for fuller tone
· 15mm birch ply hand made cabinet with stainless steel corners and black tolex covering
SPECIFICATIONS:
CLASS AB
KT-66, 5751 PURE TUBE DESIGN
4/8/16 OHM SELECTABLE
POWER 52 WATTS @ 8 OHMS @ 5% THD
240V & 110V PRIMARY TAPS
ULTRA HIGH SPEED RECTIFIERS
B+ SAG FUNCTION
0db LINE OUT FROM OUTPUT STAGE
ULTIMATE HAND WOUND,
HIGH TEMP TRANSFORMERS
HIGH TEMP PURE CERAMIC TUBE SOCKETS
MILITARY SPEC HAND WIRED THROUGHOUT
(MIL-W-16878/4)
DUAL VOICED PARALLEL PREAMPS
C-TICK N15281 LEAD FREE Manufacture
ELECTRICAL SAFETY STANDARDS INSPECTED
615mm wide 220mm deep 250mm high 16kg
